ENGINE
|
 |
- Powered by 19hp Tier 4 Yanmar 3 cylinder water-cooled Diesel engine for optimum performance
- Yanmar is a global engine manufacturer of quality, giving you the confidence in relaibility and after-sales support
- Engine certified to meet the stringent Tier 4 engine and noise emission standards
- A generous engine capacity of 993cc , resulting in high torque for serious work
- For added safety when starting the engine the driver must be seated, the brake pedal depressed and the PTO switched off
|
DRIVELINE
|
 |
- The tractor weight of 650kg is a reflection of the heavy duty transmission, driveline and axles. The tractor weight is in part, a result of the heavy front axle, which is important for a tractor fitted with a front end loader as substantial loads are applied during loader operation
- The high efficiency Hydrostatic transmission gives infinitely variable drive speed in the forward and reverse direction
- The Hydrostatic drive controlled by a Forward and Reverse pedal for easy simple operation.
- Hydrostatic power steering lightens steering especially important with front end loaders
|
 |
- Industrial front and rear tyres are forgiving on lawn areas yet still maintain traction where required and are ideal for front-end loader applications
- 16 x 6.50 – 8 Front Tyers with 4 studs for greater strength
- 24 x 12 x 12 Rear Tyres with 5 studs for greater strength
|
 |
- The heavy duty front axle performs in tough working conditions and handles loads with ease
- A long wheel base and wide stance increases stability in all conditions
|
 |
- 4WD and the Diff Lock provides better traction, control and performance
- 4WD mode is controlled by a lever on the left hand side of the operator
- Quick response and durable wet disc brake
- Ergonically designed foot brake located on LHS of the floor
|
PTO, HYDRAULICS AND LINKAGE
|
 |
- Easy selection of Mid/Rear PTO which can be operated either independently or simultaneously
- Fully independant rear PTO(540rpm) & mid PTO(2000rpm) activated by electro-hydraulic clutch
- PTO engagement is easily operated by push button control on the dash
- The rear linkage is Category 1 with a large lift capacity of 499kg (at ball ends)
|
 |
- The PTO drive is a smiple and direct design for high efficiency and power
- The PTO clutch is and independant oil immersed clutch pack for long life and simple push button operation
|
 |
- Hydraulic 3 point linkage lowering speed control
|
CONTROLS
|
 |
- The ergonomic design has the controls within easy reach of the operator
- The modern instrument panel is easy to read and displays all the essential information
|
 |
- Right Hand Side controls:
|
|
|
- Left Hand Side Controls
- 4WD
- PTO
- High-Low transmission range lever
|
LAYOUT
|
 |
- Clean uncluttered access provides generous room for access on and off the tractor
|
OPTIONS
|
 |
- For the operation of log splitters or TYM TX25 Backhoe
|
ROPS
|
|
|
- 2 post folding ROPS for working under trees or low clearance areas
|
 |
- One-touch opening hood allows complete access for daily service checks and maintenance
- Side panels are easily removed without the need of special tools
|
AIR CLEANER
|
 |
- Large cannister type air cleaner for dusty Australian conditions
|
ACCESSORIES
|
- Quick detach from tractor and quick detach bucket
- Fast Cycle times (Raise/Lower)
- Inbuilt loader parking stands for safety when servicing
- Counter Ballast Box aids stability when lifting heavy loads
- Full width adjustable bump guard for tractor bonnet protection
- Heavy duty 4 in 1 bucket
- Single Joystick delivers ergonomic operation of front end loader
|
 |
- Quick detach from tractor and quick detach bucket
- Fast Cycle times (Raise/Lower)
- Inbuilt loader parking stands for safety when servicing
- Counter Ballast Box aids stability when lifting heavy loads
- Full width adjustable bump guard for tractor bonnet protection
- Heavy duty 4 in 1 bucket
- Single Joystick delivers ergonomic operation of front end loader
|
